How to Update the Range Extender

After cautiously downloading the firmware, the clients should refresh the firmware through the means gave beneath.

• Open an internet browser and visit "https://belkin.range."
• Note: The clients can likewise visit the authority IP address, i.e.192.168.206.1, to get to the Belkin Setup.
• At that point click on the "Login" choice.
• From that point onward, the clients are encouraged to enter the reach extender's secret key.
• At that point click on the "Submit" choice.
• Note: The clients can likewise leave the field clear on the off chance that they haven't arrangement the secret word of their reach extender and click on the submit alternative.
• Presently pick the "Firmware Update" choice.
• From that point onward, click on the "Peruse or pick record" choice and pick the downloaded firmware.
• At that point click on the "Open" alternative.
• Of course, click on the "Update" choice.
• From that point forward, when the brief shows up on the screen, click on the "Alright" choice.
• Presently another brief would open expressing that the gadget will not react during the update strategy.
• From that point onward, tap on the "Alright" catch and stand by till the firmware update gets total.
• Note: Make sure not to unplug or control OFF or restart the reach extender while the firmware is refreshing.

Subsequently these were the means through which the clients can play out the Belkin Setup system. With the assistance of the means talked about over, the clients can likewise refresh their extender's firmware. Notwithstanding, if any client neglects to arrangement the extender or appearances an issue refreshing the firmware, contact the experts for a one-stop arrangement.